Elea PEF Advantage Belt systems: Optimal PEF solutions for large-scale processing of roots, tubers, and fruits.
Improving yield, quality, opportunity, and savings 24 hours a day, every day.
We provide customisable PEF solutions for any production line from 0-100 t/h.
An Elea PEF Advantage for any production set-up
Micro systems
-
Our latest system is targeted at smaller production lines. Based on the successful design of our Advantage B 1 system this all-in-one belt and generator slots easily into any setup.
-
The PEF Advantage B Micro provides total control over your processing capacity from 0 - 1.7 t/h.
All in one solutions
-
The compact industrial-scale PEF solution is available in two versions, the B 1 and B 1 mini. The B 1's small footprint makes integration into any production line simple.
-
The PEF Advantage B 1 Mini offers a processing capacity of 0 - 4 t/h, while the PEF Advantage B 1 handles 0 - 10 t/h.
Large-scale production
-
The largest systems in the Elea belt range deliver unmatched robustness, power efficiency, safety, and ease of use. Built with premium stainless steel and engineered to the highest standards by our German team, these systems are designed for 24/7 operation in the most demanding environments.
-
We build a range of different models for large-scale production.
The PEF Advantage B 10-320: 0 - 15 t/h.
The PEF Advantage B 100-550: 0 - 32 t/h.
The PEF Advantage B 1000-850: 0 - 100 t/h.
Freeze drying
Potato chips
Vegetable processing
French Fries
Vegetable chips
Air drying
Freeze drying Potato chips Vegetable processing French Fries Vegetable chips Air drying
We design and build all of the Elea PEF Advantage systems to the highest standards at our facility in Germany.
Since 2010, our Elea PEF Advantage Belt systems have helped produce chips, fries, vegetables, dried products, and more. Elea PEF systems have become an industry standard worldwide, bringing dramatic and positive change to both products and processes.
Today, hundreds of our belt systems are installed in factories worldwide, operating reliably 24/7. They help produce tastier potato chips, longer French fries, and more visually appealing dried products, all while delivering higher yields and lower costs.
-
24/7 operation
Robust build and solid-state typology ensure that the PEF technology in our PEF Advantage Belt systems is exceptionally reliable, which means 24/7 operation and low maintenance costs.
Our PEF Advantage Belt systems are manufactured to the highest quality to make sure each one can withstand continuous operation and maximum performance. As part of our range of service contracts, we can supply each customer with around-the-clock technical support.
-
Fully Customisable
To fulfil the needs of our clients, we’ve made sure our PEF Advantage Belt systems are fully customisable and scalable to specified criteria across design, mechanics and software programming.
Our expert team works in close collaboration with our clients to make sure that the system we deliver meets their requirements, so even if you need something like a split belt, we can make it happen.
-
Total Control
Our PEF Advantage Belt systems are designed to be compatible with any standard processing control system and fully accredited and certified for regional installation anywhere in the world.
We work in partnership with our clients to make sure they’re using the full potential of their PEF Advantage Belt system and getting the most benefits of PEF. We’ll listen to what suits your product and desired application goal and help to achieve that with a tailored treatment parameter.
New PEF innovation, year by year
With the number of people recognising the potential of PEF for their product growing every day, our goal is to provide the best PEF solution for every producer who needs it. Our team is constantly exploring new innovations while developing and refining cutting-edge systems.
The Elea PEF Advantage B 1000-850
Released 2022
The Elea PEF Advantage B Micro
Newly announced for 2024
Training, global support and installation
Our highly skilled technical team provide comprehensive training and a continual support service around the world, including full PEF Advantage Belt system installation and maintenance.
-
Training
Investment in training of your PEF Advantage Belt maintenance engineers and operators will ultimately result in skilled and knowledgeable personnel. This will allow for ideal system operation and performance when it comes to yield, settings, up-time and safety.
Experienced and well-trained staff are essential to your success, so we offer in-house and on-site PEF Advantage Belt system training that’s tailored to your specific requirements.
-
Support options
We offer a number of service options that include full support, no matter where our clients are based, and will send a highly skilled technical team to provide full installation and maintenance when needed.
We can also conduct remote monitoring of your PEF Advantage Belt system and provide customer care around the clock. It’s also possible to connect to your system remotely to allow diagnostic and support from our Customer Service department.
-
Total Control
Our PEF Advantage Belt systems are designed to be compatible with any standard processing control system and fully accredited and certified for regional installation anywhere in the world.
We work in partnership with our clients to make sure they’re using the full potential of their PEF Advantage Belt system and getting the most benefits of PEF. We’ll listen to what suits your product and desired application goal and help to achieve that with a tailored treatment parameter.
Frequently asked questions about Elea PEF Advantage belt systems
-
No, it’s not necessary. The PEF Advantage Belt system is designed to operate without the need for a full-time operator.
-
We recommend that your PEF Advantage Belt system receives an annual inspection from the Elea service team each year. They’ll check the system’s calibration and correct function, along with mechanical checks. We also recommend that customers give their system a monthly PPM that takes approximately one hour.
-
Yes, each part of the PEF Advantage Belt system that comes into contact with the product is either stainless steel or CE and FDA listed plastics. All certification is supplied with your system as part of the documentation.
-
Yes, we manufacture all metal parts using Stainless Steel 1.4301 or higher. After welding, all metal components of the PEF Advantage Belt system undergo grit polishing.
-
Yes, we can integrate with any factory SCADA system, providing full access to our PLC and controls as if you were right next to the PEF Advantage Belt system. Additionally, if needed, we can remotely log in from our office to assist with any issues.
-
No, the PEF Advantage Belt system is designed for quick and easy part replacement. All electronic components are plug-and-go, requiring no additional setup.
-
No, we design each PEF Advantage Belt system with easy access for cleaning and there are no special requirements for cleaning solutions, as those commonly used in the food industry are sufficient.
-
The PEF Advantage Belt system requires electricity, compressed air, water, and cooling water for the generator.
-
Yes, as part of the PEF Advantage Belt system installation, we provide standard training for operators and maintenance personnel. Additionally, we offer further training at our facility in Quakenbrück, Germany.
-
Yes, absolutely. We can equip your PEF Advantage Belt system with an additional top belt (or hold-down belt) to keep floating products submerged. If needed after the initial installation, this can also be retrofitted.
-
Typically, the PEF Advantage Belt system requires 4 to 6 water changes in a 24-hour period, depending on the product volume and cleanliness. Your system will automatically monitor and control the water conductivity, periodically draining small amounts of water from the tank and replacing it with fresh, clean water.
-
Yes, the electrical cabinets on the PEF Advantage Belt system are designed for use in wet areas.
-
Yes, some of our customers prefer using a closed-loop cooling circuit for their PEF Advantage Belt system generators, utilizing water or glycol, typically maintained at a minimum temperature of 15°C.
-
Yes, PEF is a volumetric method and a physical process, ensuring uniform treatment of all products. For example, all potatoes in the water tank or juice in the treatment cell will be evenly affected.
Elea Cut Control and PEF Control. Precision PEF monitoring and optimisation tools
Optimise and maintain your PEF treatment parameters, get the best possible result for your product.
Cut Control
Monitor quality control with precision and optimise treatment conditions for potato and vegetable cutting with Elea Cut Control.
PEF Control
PEF Control measures the impact of PEF cell disintegration and optimises mass transport processes, such as sugar extraction, drying or infusion.
Meet the Elea Belt team
-
Jimmy Kinsella
Engineering Manager
-
Kevin Hill
Application Support Manager
-
Johannes Pfeiffer
Sales Manager
Prof.-von-Klitzing-Str. 9, D-49610 Quakenbrück, Germany
Hours
Monday–Friday
8.00 - 17.00
Phone
+49 (0) 5431 92629 70